Monoprice 6660 8-channel Security DVR - Manual (Page 40)

40
Installation and user manual
[ Program Update ]
Always turn off : Playback and Network access while upgrading the unit
The latest firmware version can be upgraded through USB 2.0 Port using Memory Stick or
CD/DVD Media. When a memory stick is connected to the USB port, this symbol will
be shown in the status bar of the screen.
Enter “menu”-> “System Set”-> “Program Update”. If the system recognizes the new
firmware then, “New program found” will be displayed on the screen.
Next press the “SELECT” button.
Processing percentage will be displayed.
NOTE
1. If the system doesn’t recognize the new firmware, “New program not found” will be
displayed.
2. USB compatibility has been tested successfully with: Lexar Jumpdrive 128/256MB,
Sandisk Mini Cruzer & Cruzer Micro 2GB, KINGSTONE 2GB, A-DATA 2GB, IMATION 2GB,
SANDISK 1GB, SANDISK 512MB, MARUZEN 1GB
3. For system stability, please turn off 1) recording 2) playback 3) network connection during
upgrading.
4. After updating program, reboot the DVR. The simplest way is press POWER button and
enter the password.