Monoprice 6660 8-channel Security DVR - Manual (Page 82)

82
Installation and user manual
PTZ Controller
4. Network
NTP
Each Keyboard can be allocated an
RS485 ID between 1 and 255.
Each keyboard can have an RS485
protocol associated with it.
NTP setup allows the DVR to have its internal
clock synchronised with an External clock.
The default setting is “Off”
Type allows selection between:
Default – Time server is “time.bora.net”.
Domain – Where another time server name can
be added.
IP – Where an IP address for a time server can
be input.
Select City :
Once the NTP settings have been set, you must
then tell the DVR which time zone you are in.
This will allow it to offset any time differences if
the time server you contact is in a different zone.
Select City, the map screen will appear. Hover
over the city selection box, a drop down arrow
will appear, click on the arrow. A list of time zones
will be displayed. Select the time zone where the
E4000 is located.