Outback Power Systems MATE3 Owners Manual - Manual (Page 161)

Installer Settings
900-0117-01-00 Rev C 159
Table 11 Installer Settings (MATE3 Settings)
Menu
Menu
Option
Menu Items Set Points
Installer
Settings
Page
Enable
Weekday Start
Weekday Stop
Weekend Start
Quiet Time
Schedule
Weekend Stop
119
Enable
Exercise Run on (Day)
Start Time (0:00)
Run Period (15 minutes)
Exercise Interval (2 weeks)
Generator
Exercise
Schedule
Disable Sell During
Exercise (N/Y)
120
Set Generator
Total Run Time
0.0 – 999.9 Hours 121
Display AGS
Timers
121
Data Logging 122
Enable (Disabled)
Grid Connect ___ Vdc
Delay ___ min (Range?)
Grid Disconnect ___ VDC
Delay ___ min (Range?)
Grid Connect SOC ___%
High Battery Transfer
Grid Disconnect SOC ___%
124
Enable (Y or N)
Weekday Use
Weekday Drop
Enable (Y or N)
Weekday Use
Weekday Drop
Enable (Y or N)
Weekday Use
Weekday Drop
Enable (Y or N)
Weekend Use
Grid Use Time
Weekend Drop
125
Charge Controller
Float Coordination Enable (Y or N)
127
Enable Charge
Termination Control
Enable Auto Grid-Tie
Control
Battery Status
Low SOC Warning Level
FLEXnet DC Advanced
Control
Critical SOC Warning Level
128
Reset to Factory
Defaults
Y or N 129