Setting up communication to the mate3, Connecting a mate3 directly to a computer, Installation – Outback Power Systems MATE3 Owners Manual User Manual

Page 24

Advertising
background image

Installation

22

900-0117-01-00 Rev C

Setting up Communication to the MATE3

IMPORTANT:

Use either Mozilla Firefox® or Google Chrome® browsers to view the MATE3
web page on a personal computer. Internet Explorer® may not work properly.

Connecting a MATE3 Directly to a Computer

To access the MATE3 web page directly from the MATE3, follow the instructions below.

Figure 14

Accessing the MATE3 Directly Using a Computer

REQUIREMENTS:

 MATE3 configured for network communication

(see Programming section)

 A computer with networking enabled
 Mozilla Firefox® or Google Chrome® internet browser

Firefox®

Chrome®

Recommended Browsers

To enable the MATE3 to communicate directly with a computer:

1.

Make the connections illustrated in Figure 10.

2.

On the computer, open a browser window.

3.

In the address bar of the browser, type in the number 192.168.0.64 and press the ENTER key.

Not Compatible

Internet Explorer®

Address Bar

Advertising