Pure DRX-601 series tuners - Manual (Page 13)

11
Technical Specifications
This section lists the technical specifications for the DRX-602ES.
General Digital radio tuner with full Band III and L-band reception capability, for reception of all UK, Europe and Canada DAB broadcasts.
Fully compliant with ETS 300 401 and capable of decoding all DAB transmission modes 1-4. Analogue stereo output, optical
and coaxial 48 kHz S/PDIF digital output and RDI digital output
Frequency Range Band III (174 - 240 MHz) and L-band (1452-1490 MHz), with autotune feature
Tuner Sensitivity -98 dBm
Integrated DAC 24-bit 96 kHz stereo DAC
Input connectors RF F-connector 75 W for DAB aerial connection (aerial supplied)
(rear panel) Dual phono for external line level audio input (from FM/AM/AUX tuner unit) with auto pass-through to output at power off
Output connectors Dual phono for stereo analogue audio output
(rear panel) Optical Toslink connector for digital S/PDIF output (IEC958 @ 48 kHz)
Coaxial connector for digital S/PDIF output (IEC958 @ 48 kHz)
Optical Toslink connector for digital RDI data output
Controls Power on/off
Rotary selection switch - selects service
Autotune - tunes in unit to broadcast services and enables language and tuning zone selection
Brightness - selects between 4 levels of LCD display brightness
Display - selects between DLS (Dynamic Label Segment) scrolling text, programme type, and service information
Info - switches LCD between display of signal strength indicator and mono/stereo mode plus service’s data rate
LCD Display High visibility STN LCD display with 16 x 2 characters, 4 user-selectable brightness levels and 11 language options
Indicators LED power-on indicator
(front panel) Remote control activity indicator
Stereo service indicator
Secondary service availability indicator
Frequency response 20 Hz to 20 kHz for 48 kHz decode at full data rate
20 Hz to 12 kHz for 24 kHz low sample frequency (LSF) decode
THD (nominal output) Less than 0.005% at 1 kHz
S/N Ratio: 100 dB
Display Languages English, German, Swedish, French, Italian, Spanish, Norewegian, Finnish, Danish, Dutch, Portuguese.
Remote control Infrared remote control functions: service select, preset service store/recall, DRC (dynamic range control), mute and primary or
secondary information display
Power supply High-performance low noise internal toroidal transformer power supply. 220-240V AC 50Hz (Europe) or
115V AC 60Hz (Canada)
Approvals CE marked. Compliant with the EMC and Low Voltage Directives (89/336/EEC and 73/23/EEC)
Dimensions 430mm (width) x 59mm (height) x 270mm (depth)