Pure DRX-601 series tuners - Manual (Page 5)

3
Controls and Connectors
This section provides information on the controls and connectors available on the front and back panels of your DRX-602ES.
For information on the remote control, see Using the remote control.
Front Panel
Rear Panel
Power on/off button and LED
Stereo LED indicates when stereo service is being received, see Using your DRX-602ES: Selecting a ser vice
Secondary LED indicates whether secondary services are available, see Using your DRX-602ES: Selecting a ser vice
Remote LED indicates remote control activity
Remote sensor picks up the infrared signal from the remote
Backlit LCD display
Brightness button changes the display brightness
Info button changes the information mode of the display, see Using your DRX-602ES: Viewing extra information
Display button changes the main display mode, see Using your DRX-602ES: Changing the display mode
Autotune button provides one touch tuning, language and tuning zone selection see Using your DRX-602ES: Tuning
Tuning button selects the digital radio service, see Using your DRX-602ES: Selecting a ser vice
AERIAL connector
S/PDIF co-axial and optical digital outputs, see Setting up: Connecting to digital devices
RDI (Receiver Data Interface) socket, see Setting up: Connecting to an external decoder
INPUT loop through input for AM/FM tuner
OUTPUT to amplifier line-level stereo (analogue)
Power lead for connection to wall outlet