Pure Highway - Manual (Page 10)

8
Changing stations
1. Rotate the [Tune] dial to scroll through the station list. » A
2. Push the [Tune] button to select a station. » B
Switching the unit on and off
To switch the unit off press and hold the [Tune] button until ‘Switching off’ is displayed.
A single press of the [Tune] button switches the unit on again.
Changing the FM transmission frequency
If you hear interference when listening to Highway you can change the FM frequency
that Highway is transmitting on and then re-tune your car radio to the new frequency.
To quick scan to the next free FM transmission frequency
1. Press the [quickSCAN] button twice to scan to the next free FM frequency. » C
2. Re-tune your car radio to the new FM frequency displayed. » D
3. Press [Tune] to exit the FM frequency screen, or wait a few seconds.
To scan to the next or previous free FM transmission frequency
1. Press [quickSCAN] to display the current FM transmission frequency. » E
2. Rotate the [Tune] dial to scan to the next or previous free FM frequency. » F
3. Re-tune your car radio to the new FM frequency, or rotate the [Tune] dial again.
To manually set the FM transmission frequency
Change the FM tuning mode to ‘Manual’ ( page 14 ) and follow the steps above to
adjust the transmission frequency in 01.MHz increments
Using Highway
BBC Radio 4
Classic FM
04-02-2008
BBC Radio 4
88.30MHz
Searching... >
88.1MHz
88.30MHz
x 2
Searching... >
88.3MHz
A
B
C
D
E
F