Pure Avalon 300R Connect - Manual (Page 17)

13
Watching Freeview TV
When you switch on Avalon from standby, Avalon will tune to the channel that was being
viewed the last time Freeview TV was watched.
You can also select Freeview TV (or listen to Freeview digital radio channels), by selecting
Freeview TV from the Home ( ) menu.
Pausing live television
If you need to interrupt your viewing of live television at any point, you can press the button.
This will pause the programme until you return. You can then press again to continue
watching the programme.
Rewinding and watching live television
Avalon will temporarily store the programme you are watching for a set amount of time. This
allows you to rewind and watch the programme, using the following buttons on the remote
control:
rewind or fast forward through the stored portion of the television programme. You
can repeat press to increase or decrease the speed, e.g. x4, x8 etc.
play or pause
stop reviewing the stored portion of programme and return to live broadcast
Note: You can set how long Avalon stores live television, i.e. how far back you can rewind live
television or one touch record from, by changing the timeshift setting.
Changing channel
You can change channels in a number of ways.
Changing channels directly on the remote control
To change channels directly on the remote control, either enter the channel number using the
alphanumeric buttons, or cycling through the channels by using either the Prog + and Prog -.
Alternatively, press the and buttons to display the info bar and scroll through the channels.
Press the OK button to select and change to the highlighted channel.
Press the Back button to switch to the channel you were watching previously.
Changing channels using the channel list
To change channels using the channel list, press the OK or button to display the channel list.
Then select the programme you want to watch by using the and buttons and press the
OK button to tune.
See “The channel list” on page 16 for further information.
Changing channels using the Electronic Programme Guide
To change channels using the Electronic Programe Guide (EPG), press the Guide button to
display the guide.
Then select the programme you wish to watch by using the and buttons. Press the OK
button to tune. See “The Electronic Programme Guide” on page 18 for more information.
Freeview TV