Pure Avalon 300R Connect - Manual (Page 33)

29
Against each scheduled recording, a symbol is displayed:
red indicates the recording failed
green indicates the recording was successful
yellow indicates the recording was not completed (either because it was
stopped or there was a problem, e.g. a power failure)
red (small) indicates the recording of a single programme
red (small) indicates the recording of a series
Editing and deleting scheduled recordings
Edit scheduled recording
To edit the parameters of a recording schedule, select it from the list of recording schedules
and press the yellow (Edit) button. The screen lists all the details of the recording schedule. Edit
them in the same way as they are set up (as described above).
If required, you can also suspend a recording schedule by selecting Yes in the Suspended
option. This will mean that any recordings scheduled in the recording schedule will not take
place until this option is set back to No.
Delete a scheduled recording
To delete a scheduled recording, select it from the list of scheduled recordings and press the
red (Delete) button.
A message will ask you to confirm that you want to delete the scheduled recording. If yes,
press the OK button.
Resolving recording conflicts
If one recording clashes with another, for example, if you try to One Touch Record a
programme that is already being recorded in accordance with a recording schedule, a message
is displayed on the screen to warn you of this. For example:
Resolve the conflict by choosing which recording to cancel or continue with. Select the
recording in question and then select Resolve.