Racing Electronics SC180 - Manual (Page 31)

Troubleshooting
If your SportCat is not performing properly, try the steps
listed below.
PROBLEM SOLUTION
Scanner won’t work. Check the power connections.
Check the volume and squelch.
Make sure the power switch is
turned on.
Improper reception. Check the antenna connection.
You may be in a fringe area.
Reposition the scanner.
Scan won’t stop. Adjust the Squelch Control.
Check the antenna connection.
It is possible that none of the
programmed frequencies are
active at the time. Try Band
Search.
Scan won’t start. Make sure there are some
programmed channels.
Adjust the Squelch Control.
Search won’t start. Adjust the Squelch Control.
Keypad won’t work. Check the Keypad Lock.
If you still cannot get satisfactory results and want
additional information, or to return the unit for service,
please call or write the Uniden Parts and Service Division.
The address and phone number are listed in the Warranty
(at the end of this manual).
28