Sandvik Coromant Silent tools - application guide - Manual (Page 11)

9
1. Introduction
Typical components
There is a big potential for increased productivity using Silent Tools
in all type of industrial segments. For components requiring long
tools (~6-14 x BD) Silent Tools is the only choice for vibration-free
machining.
General Engineering
Typical components: Shafts,
brackets, hydraulic components
(cylinders, sleeves), pumps and
valve housings etc.
Power Generation
Typical components: Gas tur-
bines, gas turbine discs etc.
Aerospace
Typical components: landing
gears, shafts, titanium compo-
nents, turbine discs etc.