Sandvik Coromant Silent tools - application guide - Manual (Page 26)

24
2. Milling
The program consists of Coromant Capto sizes C6, C5 and
cylindrical shanks in diameter 20, 25, 32 and 40 mm
(0.787, 0.984, 1.260 and 1.575 inch) with a reach of 3–5 times
the cutting diameter, DC.
• Coromant Capto® C5
– High stability
– Large programme of basic holders
– First choice for closed reach
• Coromant Capto® C6
– High stability
– Large programme of basic holders
– Integrated multi-task spindles
– First choice for open reach
• Cylindrical shanks
– Hydraulic Chucks, e.g. CoroChuck 930, for accurate holding
of the cutter.
– Collet chucks