Sandvik Coromant Silent tools - application guide - Manual (Page 23)

21
2. Milling
Product overview
There is a wide range of Silent Tools milling adaptors available off
the shelf, with HSK or modular Coromant Capto couplings.
If none of our standard adapters are suitable, inquire for an
engineered solution. Adaptors for slitting cutters, built-in
dampeners in large side mills and long-edge cutters are also
available as engineered solutions.
End mills and square shoulder
face mills Dampened adaptors for face mills and square shoulder face mills
CoroMill® 390D Dampened adaptors
– Coromant Capto Dampened adaptors
– HSK
Cylindrical shank or Coromant
Capto back-end coupling Coromant Capto back-end
coupling (C4, C5, C6 and C8) HSK back-end coupling
(HSK 63 and HSK 100)
Coarse, close and extra close
pitch Wide range of exchangeble
cutting heads Wide range of exchangeble
cutting heads
DC: 20-40 mm
(0.787-1.575 inch) Coolant through Coolant through
Overhang: ≤ 5 x BD BD: 40-80 mm
(1.575-3.150 inch) BD: 63-100 mm
(2.480-3.937 inch)
DMM: 16-32 mm
(0.750-1.500 inch) DMM: 16-27 mm
(0.750-1.000 inch)
Overhang: ≤ 8 x BD Overhang: ≤ 8 x BD