Abbingdon Music Research Compact Disk Processor CD-77 - Manual (Page 21)

21
Upon closing the door, play will automatically commence from Track 1. This Autoplay feature can be enabled/
disabled by simultaneously pressing the STOP button (F5) on the front fascia of the CD-77 and pressing the
PLAY/PAUSE button (RC8) on the RC-77 remote control.
NOTE: The CD-77 has been designed to play all types of compact discs including the CD layer of hybrid
SACD’s. However, as such discs are thicker, please ensure the CD puck is positively engaged with the spindle.
We do not recommend the placement of any type of ‘damping disc’ on top of a compact disc.
4. Display
The display provides information about playback status and the optical pickup’s location on the compact disc.
5. Play/Pause
Once the compact disc has been correctly placed in the CD-77, press PLAY/PAUSE (F3) on either the front
fascia of the compact disk processor or on the RC-77 (RC8), to commence playback.
During playback, at anytime, pressing PLAY/PAUSE again, on either the front fascia or the RC-77, playback
will be paused. To resume playback, press PLAY/PAUSE once more.
When the recording was made on the compact disc, it was segmented into numbered tracks. Typically each
numbered track will correspond to a different song, symphonic movement, etc. These track numbers are iden-
tified on the CD package and are encoded in the disc by its manufacturer. As a result, the display will automat-
ically illustrate the current track number and the elapsed time of a particular track (or other time indications as
selected via the remote control).
Always use the
CD puck