Abbingdon Music Research Compact Disk Processor CD-77 User Manual
Page 24
24
Repeat A-B
will be displayed with the letter ‘B’ flashing. This means that it has commenced the selection of that passage of
music. By pressing the A-B button (RC3) again:
Repeat A-B
will be displayed with the letter ‘B’ no longer flashing. This is to confirm the particular passage of music has
been identified and repeat will commence.
To cancel this program, press the A-B button (RC3) again.
12. DAC Input (RC-77 only)
The DAC button (RC4) is for the replay of music on the CD-77 from music stored on a computer hard-drive via
a USB-to-USB cable connection.
To establish the connection between the CD-77 and the hard disk source:
i.
Power ON the CD-77.
ii.
On the RC-77 press the DAC button (RC4) to place the CD-77 in DAC mode.
iii.
Power ON the personal computer.
iv.
Connect the USB cable between the CD-77 and the personal computer.