EarthQuake XJ-300FR - Manual (Page 16)

16 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.eu
Connecting to SWAT 2.4 Wireless Transceiver
SWAT 2.4 Wireless Receiver
SWAT 2.4 Wireless Transmitter
Music Source
with audio output
The XJ-300FR is optimized for use with the SWAT 2.4 Wireless Transceiver.
After the amplifier is wired to the speakers, connect the SWAT 2.4 Receiver
to the RCA inputs on the XJ-300FR using a mini-jack to RCA Y adaptor. To
power the SWAT 2.4, connect a USB cable from the SWAT to the amplifier.
Connect the SWAT 2.4 Transmitter to your
music source, processor, or computer with
an RCA or mini-jack output. Be sure to
power the SWAT with either the supplied
wall wart or through the USB port. Now you
can wirelessly transmit audio to the XJ-
300FR.
SWAT 2.4 Version 2 will be able to
transmit both signal and power through
its USB port, thus eliminating the need
for any RCA connection. Note:
Make sure the back input toggle switch is set to “RCA” if
connecting to the SWAT 2.4 Version 1. Note: