Vaisala MMT330 - Manual (Page 108)

User's Guide _______________________________________________________________________
106 __________________________________________________________________ M210733EN-G
HELP
Use the HELP command to list the commands. The available commands
are determined by the device configuration and installed options.
Example:
>help
? ACAL ADDR AERR ALSEL
ASEL CDATE CLOSE CON CRH
CT CTEXT DATE DELETE DIR
DSEL DSEND ECHO ERRS FCRH
FILT FORM HELP INTV ITEST
LIGHT LOCK MODBUS MODS OIL
PLAY PRES R RESET SCOM
SDELAY SEND SERI SMODE SYSTEM
TEST TIME UNDELETE UNIT VERS
XPRES
>
ERRS
Use the ERRS command to display transmitter error messages, see Table
30 on page 146.
Example (no active errors):
>errs
No errors
>
Example (showing active error):
>errs
Error: E2 Humidity sensor open circuit.
>
MODS
Use the MODS command to display information about the optional
modules that are connected to the transmitter.
Example:
>mods
Module 1 : WLAN-1 (POST: release_82000941_J; FW:
Version 82000977_K1 10/16/2008)
Module 2 : LOGGER-1 (1024 MB; HW: B; SW: 5)
>