Vaisala vNet PoE Network Interface - Manual (Page 18)

12 VAISALA
Note:
The vNet Device has DHCP enabled by default. If
your network does not have a DHCP server, manually
assign a static IP address.
To manually configure IP settings for your vNet Device:
1
From the vNet Configuration and Management interface,
choose
Configuration | Network | IP Settings
.
2
Select the option,
Manually configure the IP Settings using
static values
, then enter the IP Address, Subnet Mask, and
Default Gateway supplied by your IT administrator.
3
Click
Apply
. When prompted, click the
here
link to restart the
vNet Device.
NetBIOS Name
A NetBIOS name provides an easy way to connect to your vNet
Device through a Web browser, without having to remember the
assigned IP address.
To access a vNet Device using the NETBIOS name, simply enter
the name in the address line of your Web browser:
http://NetBIOSname