Vaisala vNet PoE Network Interface - Manual (Page 32)

26 VAISALA
8
Click
Apply
.
• If a message appears stating that the vNet Device needs to
be restarted, click the
here
link to restart the Device.
• If you do not need to restart the Device, click the browser’s
Refresh
button to update the Web interface with the new
values.
Updating Software
You may need to update the vNet Device application software if a
problem is identified, or if new features are available. You can
update the application Firmware, the Boot Loader, or the Web
interface.
Important: Only update the vNet Device when instructed to
do so by a Vaisala representative, and ensure the
update is complete before unplugging any cables.
Communication with the Logger attached to the
vNet Device is disrupted during the update.
To update the vNet Device:
1
From the vNet Configuration and Management interface,
choose
Utilities | Update Firmware
.
2
In the Update screen, from the drop-down list, select
Boot
Loader
,
Firmware
or
Web Interface
.
3
Click
Browse
to locate and select the update file provided by a
Vaisala representative, then click
Open
.
4
Click
Apply
. Updating the Boot Loader or Firmware
completes in about 1 minute.
The vNet Device restarts automatically, and the Web inter-
face reloads (it takes about 1 minute for a Web interface
update to complete and the new Web interface to load).