Avital AVISTART 4400 - Manual (Page 34)

31 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
valet ® mode
You can prevent your security system from automatically arming
and triggering by using Valet ® Mode. This is very useful when
washing the vehicle or having it serviced. In Valet ® Mode, the
security system will not arm, even with the remote, but all
convenience functions (door locks, trunk release, etc.) will
continue to work normally.
To enter or exit Valet ® Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet ®
button within 10 seconds.
The status LED will light solidly if you are entering Valet ®
Mode, and it will go out if you are exiting Valet ® Mode.
To enter or exit Valet ® Mode using the remote:
Steps 2 through 3 must be quickly and smoothly completed.
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The status LED will light solidly if you are entering Valet ®
Mode, and it will go out if you are exiting Valet ® Mode.
DRW-35
➜