Avital AVISTART 4400 - Manual (Page 56)

53 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
QUICK REFERENCE GUIDE
Arming
■ To arm, press
. When the system arms, you will hear a short chirp, and
the parking lights will flash once.
Arming while driving
■ To arm the system while driving, press on your remote while the vehicle
is running. The system will chirp once and then once more to indicate that
the ignition is on.
Disarming
■ To disarm, press . You will hear two chirps, and the parking lights will
flash twice.
High security disarm
■ For high security disarm, press on your remote and the siren will stop
sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).
Disarming without a remote
■ Turn on the ignition. Press the Valet
® button within 15 seconds. The system
should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.
Silent Mode ™
■ Pressing (or on the 4-button remote) briefly before arming or
disarming will eliminate the confirmation chirp(s) for that one operation
only.
Panic Mode
■ Press
for 2 seconds, and you will enter Panic Mode. The siren will sound
and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press
on the remote again.
To remote start the vehicle
■ Press twice within 3 seconds. The parking lights will turn on (if
connected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
■ To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet ® switch_________________________________
CCuu
tt
aall
oo
nn
gg
dd
oo
tttt
eedd
ll
iinn
ee
aann
dd
ff
oo
lldd
ff
oo
rr
aa
qq
uu
iicc
kk
aann
dd
ee
aass
yy
rree
ffee
rree
nn
ccee
tt
oo
kk
eeee
pp
ii
nn
yy
oo
uu
rr
pp
uu
rrss
ee
oo
rr
ww
aall
llee
tt..
✂
✂