Avital AVISTART 4400 - Manual (Page 46)

43 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1 1 Trunk Pin
2 2 Instant trigger - a heavier impact
detected by the shock sensor
3 3 Door switch trigger
4 4 Instant trigger - for optional
sensors
5 5 Ignition trigger
6 6 Hood Pin
interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming
diagnostics. If you receive a Bypass notification when arming or
a Tamper Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks
by the LED.
Example
If zone 3 was active or triggered, the LED will blink three times
with a two-second pause. Then it will blink three times again,
and repeat until the ignition is turned on.
note: Your system stores the last two triggered zones in
memory. If your system has been triggered but the LED
has been reset by turning on the ignition, your dealer can
still recall the last two zones that were triggered. Contact
your dealer for details.
➜