AEG LAVAMAT 88810 - Manual (Page 15)

15
Changing the temperature
Press the TEMP. key repeated-
ly until the desired temperature
is displayed.
Changing spin speed/selecting rinse hold
Press the RPM key repeated-
ly, until the desired spin
speed or
RINSE HOLD is
displayed.
3
With spin speed “0” the last
rinse water is drained off at
the end of the cycle, but the
washing is not spun.
• With
RINSE HOLD the washing is left to soak in the last rinse wa-
ter. There is no final spin after the intermediate spin(s). Intermediate
spins are programme-dependent and cannot be altered.
Setting options
Options can be added to a wash cycle that has already been selected.
Press the OPTIONS key. The display shows the symbols for the options.
PREWASH
Pre-washes at about 30 °C before the main wash cycle, which
follows automatically.
SENSITIVE
Enhanced rinse action through an additional rinse cycle togeth-
er with decreased drum movement (improved fabric care). This
is ideal when frequent washes are necessary, for example, in
cases of highly sensitive skin. An additional rinse cycle can also
be permanently set (see section “Setup”).
L I N E N / E A S Y C A R E
12.45
C y c l e e n d a t
14.37
50C1 8 00 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. RPM OPTIONS OK TIME
L I N E N / E A S Y C A R E
12.45
C y c l e e n d a t
14.37
50C 800 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. RPM OPTIONS OK TIME