AEG LAVAMAT 88810 - Manual (Page 21)

21
Setting the Memory
Example: Program position
MEMORY 1 is to be given the
following program combina-
tion: LINEN/EASY-
CARES 40 °C, 800 rpm, with
PREWASH.
1. Turn the program knob to LI-
NEN/EASY-CARES.
2. Press the TEMP. key repeatedly, until 40 °C appears in the display.
3. Press the RPM key repeatedly, until 800 appears in the display.
4. Using the OPTION key set
PREWASH and press the OK key. A black
bar appears under the PREWASH symbol .
5. Press the OPTIONS key repeatedly, until the SETUP symbol flashes.
6. Press the OK key. The display
changes to the Special Func-
tions level. Program memory
position MEMORY 1 is of-
fered first.
3
To change to another memo-
ry position, press
the OPTIONS key.
7. Press the OK key.
The program combination is now stored to program knob position ME-
MORY 1 and in the future can be selected directly using the program
knob.
3
The Memory can be overwritten at any time with a new program com-
bination (see “Changing the Memory”) but cannot be deleted.
Changing the Memory
1. Put together the new program combination as required (for an exam-
ple, see “Setting the Memory”, steps 1 to 4).
2. Press the OPTIONS key repeatedly, until the SETUP symbol flashes.
3. Press the OK key.
4. Using the OPTIONS key select the memory position to be changed, e. g.
MEMORY 1.
5. Store the new program combination using the OK key.
L I N E N / E A S Y C A R E
12.45
C y c l e e n d a t
14.37
40C 800 aýýýýýVýaýaýaýaýaýaýaýa
TEMP. RPM OPTIONS OK TIME
M e m o r y 1
S t o r e p r o g r a m
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. RPM OPTIONS OK TIME