AEG LAVAMAT 88810 - Manual (Page 18)

18
4. To change from SHORT to
VERY SHORT, press the TIME
key again.
3
You can change between
NORMAL, SHORT, and VERY
SHORT using the TIME key.
5. Press the OK key to confirm
the selection. The display
changes to the symbol for
DELAY START, i.e. DELAY START can now
be set.
6. Press the TIME key, if no Delay Start is to be set. The display shows the
TIME SAVING symbol as well as the time for the end of the cycle.
Delay Start
1. Press the TIME key repeatedly, until the DELAY START symbol flashes.
2. Press the OK key. In the display, “Start in 0 min” is displayed.
3. Press the TIME key repeated-
ly, until the display shows
the desired period by which
you want to delay the start,
e. g. “Start in 4h” (=4 hours).
A black bar appears under
the
DELAY START symbol.
3
If 20 h is displayed and you
press the key again, the delayed start is cancelled.
4. Press the OK key. The display shows the DELAY START and the time
until the end of the program (including period by which the start has
been delayed).
5. To activate the Delay Start,
press the START/PAUSE key.
The display now shows e. g.,
“Start in 4.00” (=4 hours).
The display for the time re-
maining until the start of the
program is reduced in 30
minute intervals (e.g., 4.00,
3.30, 3.00, ... 0.30, 0).
T i m e s a v i n g
12.45
V E R Y S H O R T
14.12
aýýýýýaýaýaýaýaýaýaýK_ýT
TEMP. RPM OPTIONS OK TIME
D e l a y S t a r t
12.45
S t a r t i n 4 h
18.37
aýýýýýaýaýaýaýaýaýaýKýT_
TEMP. RPM OPTIONS OK TIME
L I N E N / E A S Y C A R E
12.45
S t a r t i n 4.00
50C 800 aýýýýýaýaýaýaýaýaýaýaýT
TEMP. RPM OPTIONS OK TIME