Secure management, Network management, Logical connection – Axis Communications 540+ User Manual
Page 105: Wired network attachments, Logical printers, Printer ports
Technical Specification
AXIS 540+/AXIS 560
105
NetWare:
IPX, IP, iPrint, SAP, RIP, SPX and NCP (extended with NDS), NDPS, NLSP, DIAG,
LIP.
LAN Manager /LAN
Server:
NetBIOS/NetBEUI.
LANtastic:
NetBIOS/NetBEUI.
TCP/IP:
LPD, FTP, Telnet, Reverse Telnet, PROS, BOOTP, ARP, RARP, DHCP, ICMP, IGMP,
IP, TCP, UDP, HTTP, TFTP, SLP, Raw TCP, IPP, AutoIP, DDNS.
Apple EtherTalk:
AAPR, ATP, DDP, NBP, PAP, RTMP, ZIP.
Secure Management:
SSL 2.0, 3.0, TLS 1.0, HTTPS
NetWare:
Encrypted passwords, NetWare Packet Signature Level 1, 2, 3.
UNIX/Linux:
Root password, user access list and printer access.
Network
Management:
Print server/job/printer status presentation and management via
NWAdmin/PCONSOLE. AXIS ThinWizard for monitoring, configuration and
firmware upgrade.
Logical Connection:
Ethernet:
Use of IEEE 802.2, IEEE 802.3, SNAP and Ethernet II frame types simultaneously.
Fast Ethernet:
Supports NWay that provides auto-detection of network speed. Use of IEEE
802.2, IEEE 802.3, SNAP and Ethernet II frame types simultaneously, full duplex.
Wired Network
Attachments:
Ethernet:
RJ-45 connector (Category 5 twisted pair cable) for 10baseT Ethernet or
100base TX Fast Ethernet.
Logical Printers:
Logical printer ports can be programmed to perform auto ASCII-to-PostScript
conversion, string before and after job, string substitution, alternative output
and character set conversion.
Printer Ports:
• AXIS 540+: Parallel port: 36-pin Centronics connector. Highspeed IEEE 1284
compliant with ECP support and throughput of 1 MB/sec.
• AXIS 560: 25-pin DSUB connector. Highspeed IEEE 1284 compliant with ECP