Axis Communications 540+ - Manual (Page 41)

Setting Up - NetWare
AXIS 540+/AXIS 560 41
9. You will find the print server in the next window with the printer attached
on the connected port. Depending on the transport protocol you used when
you start the installation, the print server should appear as following:
• TCP/IP Network protocol:
IP Address and Port , e.g: 192.168.70.243 and LPT1
Only the ports with a connected printer show up in this window. If the
printer is not in the displayed print list, click
Manually specify the print
server and do the following:Enter the Print Servers’ IP address in the IP
Address Field and choose a port in the Print Server Port field:
e.g., 192.168.70.243 and LPT1
The available ports are:
IPX Network protocol:
All the available ports will be presented, regardless if the printers are or not
connected to those ports, e.g.
Ports available Parallel port 1 Parallel port 2 Serial port
AXIS 540+ LPT1 — —
AXIS 560 LPT1 LPT2 COM1
LPT1 AXIS5FF66A_P1
LPT2 AXIS5FF66A_P2
COM1 AXIS5FF66A_P3