Axis Communications 540+ - Manual (Page 89)

Management and Configuration
AXIS 540+/AXIS 560 89
Viewing
the Status file
The status command shows which printer port the logical printers are assigned
to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
3. View the status file by typing:
status
Performing resets Three types of reset commands allow you to perform soft resets, to perform
hard resets, and to reset the print server’s parameters to its default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
3. Restart the print server’s protocols by typing:
softreset
Replace the command in step 3 above with
hardreset or default
to perform
the other two reset operations.