Axis Communications 540+ - Manual (Page 80)

Management and Configuration
80 AXIS 540+/AXIS 560
Admin When in Admin mode, you have access to all the print server's parameters and
you can change them to your liking. This mode is intended for network
administrators and can be password protected to prevent unauthorized
changing of the print server parameters.
Note:
Accessing the Web
Pages
Follow the steps below to access the internal web pages of the Axis Network
Print Server:
1. Enter the print server’s IP address (or host name) in the Location/Address
field of your Web browser. Press Enter
2. The Printer Overview page will appear. Click the admin button to access the
Administration web pages.
3. You may be prompted for a password, enter the default user name root and
the default password pass. Click OK.
Note:
Available Services
from the User Mode
The following services are available from the User mode. A link to the Axis
home page is available from this mode.
Printer Overview The Printer Overview page contains a section that allows you to view the
general parameter setting of the Axis Network Print Server, including the print
server name and the location of the print server in your organization, if defined.
By clicking the printer icon a printer page opens, allowing you to view the
status and the supported capabilities ofconnected printer. The extent of this
information depends on the printer model. From the printer page, you can also
print a test page to the printer.
Print Jobs From the Print Jobs page you can view the status of the current print jobs,
including the number of printed bytes and the origin of the print job. You can
also view a log of the 20 latest print jobs that includes the user, the printing
protocol and the file size. A log that displays the accumulated usage of the
connected printers allows you to control the usage of the connected printers.
Help The Help page presents you with basic information about the Axis Network
To protect the Admin pages from unauthorized use, enter a password in the Root Password field
under Admin | General Settings
• It is highly recommended that you change the default password. This is done from the
Admin | General Settings | General tab in the Root Password field
• You can address the print server’s Web interface via https:// To do this you must enable
the SSL/TLS protocols in the web interface: Admin | Network Settings | Detailed View|
TCP/IP and set the HTTPS Enabled parameter to Yes (you must have a valid certificate
loaded).If you do not have a valid certificate loaded, select
Admin | Security Settings
and click Create.