Axis Communications 540+ - Manual (Page 58)

Setting Up - NetWare
58 AXIS 540+/AXIS 560
Basic Setup with AXIS NetPilot
Install the AXIS NetPilot software on your computer. AXIS NetPilot runs on
Windows 98 and Windows NT.
Starting the
Installation
Follow the instructions below to install the AXIS 540+/AXIS 560 with AXIS
NetPilot:
1. Start AXIS NetPilot by double-clicking the NetPilot icon, which is located
in the folder where you installed AXIS NetPilot.
2. Locate the Axis Network Print Server in the ‘New Axis Units’ folder. Select it
and click the Install button on the AXIS NetPilot toolbar. If your network is
large, it could take a few seconds before the print server appears in the folder.
3. Choose the with Installation Wizard option.
The AXIS NetPilot Installation Wizard guides you through the installation
process. The following options are available:
Note:
Print Server Name The default print server name consists of the characters ‘AXIS’ followed by the
last six digits of the serial number. If you want to change the print server name,
just type the new name in the available text field.
The number of options varies according to the number of environments you enable.