Mounting the swivel-mount sensor or receiver, Installation method a – AMX Sensors and Receivers IR User Manual
Page 18
Advertising
Wiring and Installation
14
IR Sensors and Receivers
Mounting the Swivel-Mount Sensor or Receiver
FIG. 19 gives dimensions for the AXD-IRSM+ and IRX-SM+.
To install the AXD-IR+ or IRX-SM+:
Mount the unit according to FIG. 20 for mounting the unit flush to a flat surface without using the
mounting bracket (Installation Method A), or FIG. 21 for mounting the unit using the mounting
bracket (Installation Method B).
Installation method A
Use when installing a swivel-mount unit without using the provided mounting bracket. The cable
exit is on the back mounting panel.
FIG. 19 AXD-IRSM+ and IRX-SM+ dimensions
Advertising