Altinex MULTI-TASKER MT109-102 - Manual (Page 20)

MULTI-TASKER™
400-0343-003 19
19
Example:
Group 5 of Unit ID 1 contains the cards in slots
1, 2 and 19. Read the member data for group 5
of Unit ID 1. Send the command [RDG5U1]
and receive the following feedback:
G1=C1C2C19
Now, clear group 5 by sending the command
[CLMG5U1]. Reread the member data as above
and note the following feedback:
G1=EMPTY
7.3 SUMMARY OF COMMANDS
Card Commands
1) [VER] Receives software version
2) [C] Receives status of the card
3) [CnS] Save card settings
4) [?C] Show card information
5) [?] Show system cards
6) [STA] Enable/disable auto feedback
7) […S] Save the command being sent
8) […F] Show command feedback
9) [ + ] Increments and Decrements
[ - ] selected commands
10) [SELI] Select input volume to adjust
11) [SELO] Select output volume to adjust
12) [SELB] Select to adjust bass level
13) [SELT] Select to adjust treble level
14) [VLO] Set absolute output volume
15) [VLIm] Set absolute input volume
16) [VLB] Set absolute bass level
17) [VLT] Set absolute treble level
18) [LOD0] Turn ON loudness feature
19) [LOD1] Turn OFF loudness feature
20) [CLR] Reset card to default values
21) [RUP] Ramp volume UP to max (16)
22) [RUP=] Ramp volume UP to a value
23) [RDN] Ramp volume DOWN to min (1)
24) [RDN=] Ramp volume DOWN to a value
25) [RST] Stop ramping
26) [RAMP] Display ramp rate
27) [RAMP=] Set ramp rate
28) [TEST] Test internal memory IC's
29) [FBD] Feedback delay on/off
30) [RSI] Reset Card ID’s
31) [SIDn] Set all Card ID’s
32) [SIDnCi] Set one Card ID
33) [SID+n] Set Card ID offset
34) [RSN] Read Card slot number
35) [HELP] Display available commands
Group Commands
36) [WR] Groups multiple cards
37) [RMC] Remove members from group
38) [RMG] Delete group
39) [RD] Displays group members
40) [CLRG] Clears group members
41) [CLM] Delete group