Altinex MULTI-TASKER MT109-102 - Manual (Page 24)

MULTI-TASKER™
400-0343-003 23
23
3: SET RAMP TIME
CURRENT RAMP TIME: 18 SEC
1: 04 SEC
2: 06 SEC
3: 08 SEC
4: 10 SEC
5: 12 SEC
6: 14 SEC
7: 16 SEC
8: 18 SEC
ESC: GO BACK
KEY=
ESC: GO BACK
KEY=
3: STATUS
Equivalent to the [C] command.
Returns the card status.
4: HELP
Equivalent to the [HELP] command.
Displays a list of commands available for the
MT109-102 along with a brief description.
ESC
Returns to the parent menu.
7.4.5 MENU MODE EXAMPLES
All MENU MODE examples assume an
MT109-102 is installed in slot #1. Start by
clicking the mouse in the Terminal window.
Press ENTER and a list of available cards will
be displayed.
NOTE When entering numeric values (not
selecting menu items) the system may
echo each character as it is typed. For
example, entering a volume of 03 may
appear as 0033 on the screen,
depending on the settings of the control
software.
1. Select THIS CARD for control
Follow the keystrokes below to select Input 3 as
the source input.
Enter List available cards
01 Select MT109-102 in slot #1
1 Select CONTROL Menu
1 Select Card/Group Select
0 Select This Card (card #1)
ESC Return to CONTROL Menu
ESC Return to the MAIN Menu
2. Set Input 3 Volume
Starting from the Main Menu, set Input 3
volume level to 16. Follow the keystrokes
below.
2 Select SETUP Menu
2 Select Set Input Volume
3 Select Input 3 Volume
16 Enter 16
NOTE The system may echo the 1
and the 6 entries, depending
on the settings.
ESC Return to SETUP
ESC Return to the MAIN Menu
3. Set Output Volume
Starting from the Main Menu, set the output
volume level to 16. Follow the keystrokes
below.
1 Select CONTROL Menu
4 Select VOLUME
1 Select OUTPUT volume
111… Press ‘1’ to increase volume level until
16 is reached.
ESC Return to VOLUME Menu
ESC Return to CONTROL menu
ESC Return to the MAIN Menu