Aiwa XD-SPM823 - Manual (Page 20)

20
ENGLISH
Connections (continued)
S-VIDEO
OUT
DIGITAL
OUT
AUDIO
OUT1
DIGITAL OUT
VIDEO OUT
S-VIDEO
COMPONENT/
PROGRESSIVE SCAN
COAXIAL
OPTICAL
L
R
AUDIO
OUT2
L
R
Y
COMPONENT
VIDEO OUT/
PROGRESSIVE SCAN
VIDEO
OUT
P R /C R
P B /C B
D Connecting to a TV and an AV receiver equipped with a Dolby Digital (AC-3) decoder
TV
Set the setup menu correctly after
connecting
Set the "TV Aspect" and "Digital Audio Output" in the setup
menu according to the TV and audio equipment connected
to the unit as follows:
(See "Changing Setup Values" on page 46 for details.)
TV Aspect
When the TV has a conventional 4:3 screen:
4:3 Letterbox or 4:3 Panscan
When the TV has a wide 16:9 screen:
16:9 Wide
Digital Audio Output
DOLBY DIGITAL/PCM
CAUTION
DO NOT select "DOLBY DIGITAL/PCM" for the "Digital
Audio Output" in the setup menu when connecting to an
AV receiver not equipped with a Dolby Digital decoder (with
an optical or coaxial connecting cord).
Merely attempting to play a disc may cause a screeching
noise which could be harmful to your ears and damage
the speakers. In this case, be sure to select "PCM" for the
"Digital Audio Output".
yellow
to the video input jack (yellow)
Video cord (supplied)
Rear of the unit
yellow
to VIDEO OUT jack (yellow)
to DIGITAL OUT
OPTICAL jack to DIGITAL OUT
COAXIAL jack
Coaxial cord (not supplied)
to an AC outlet
Optical cord (not supplied)
to the digital input jack
Receiver equipped with
a Dolby Digital decoder
Front speaker (L)
Surround speaker (L) Center speaker Subwoofer Surround speaker (R)
Front speaker (R)