Aiwa XD-SPM823 - Manual (Page 32)

32
ENGLISH
Search (continued)
Mark search
You can start playback from a desired marked point. Up to
9 points can be marked on the same disc.
To mark a desired point
During playback, press MARK at a position to be
memorized as marked point.
1/9
Marked point 1 is memorized.
Each time you press MARK, an additional point is marked.
To start playback from a marked point
1
Press SEARCH during playback or in
stop mode.
The mark search menu appears on the TV screen.
1 2 3 4
MARKER SEARCH
5 – – – –
2
Within 10 seconds, press j/l to
select a marked point you want to
recall.
3
Press SELECT/ENTER.
Playback starts from the selected marked point.
In step 2, you can also use the number buttons (1 - 9) to
specify a marked point.
Playback starts immediately without your pressing
SELECT/ENTER.
To clear a marked point
In step 2 above, select the marked point you want to clear,
then press CLEAR.
NOTES
• It may be prohibited to mark a point at multi-angle scenes
or where subtitles are recorded.
• All the marked points are cleared when:
- you turn off the power.
- you remove the disc.
- you select another disc tray.
Number
buttons
MARK
CLEAR
SELECT/ENTER
SEARCH
j l