Aiwa XD-SPM823 - Manual (Page 53)

ENGLISH
53
AS NECESSAR
Y
En
3
Press i/k to select the sample
frequency and press SELECT/ENTER.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Sample Freq.
48KHz
96KHz
Disc Subtitle
Disc Menu
Rating
TV Aspect
Menu Language
Digital Audio Output
Disc Audio
Others
Country Code
Progressive Scan
96KHz:
Select this if your audio equipment can handle 96-kHz
signals.
48KHz:
Select this if your audio equipment cannot handle 96-kHz
signals.
NOTE
If you have connected the unit to an AV receiver equipped
with both Dolby Digital and DTS decoders, it may be
necessary to change the receiver setting manually
depending on the disc to be played. For details, refer to the
operating instructions of the AV receiver.
Others
You can turn on and off the DRC (Dynamic Range Control).
When the DRC is turned on, the unit compresses the
dynamic range of the audio output (i.e. the difference
between the loudest and the quietest sounds) so that you
can listen to a movie or music at a low volume without losing
the clarity of sound.
1
Press i/k to select "Others" in the
setup menu and press the l right
cursor button.
Others
DRC Off
Disc Subtitle
Disc Menu
Rating
TV Aspect
Menu Language
Digital Audio Output
Disc Audio
Others
Country Code
Progressive Scan
2
Press SELECT/ENTER repeatedly to
select "On" or "Off".
DRC On:
Select this to play a disc at a low volume.
DRC Off:
Select this to play a disc without DRC.
NOTE
When playing DVDs recorded in Dolby Digital (AC-3) format,
the DRC only works for analog audio signals output from
the AUDIO OUT L/R jacks of the unit.
Playback
disc
96-kHz
linear PCM
DVD
DTS DVD
Dolby
Digital DVD
MPEG DVD
Audio CD
DTS audio
CD
Stream/
PCM
PCM
DTS bit
stream
Dolby
Digital bit
stream
MPEG bit
stream
PCM
DTS bit
stream
DOLBY
DIGITAL/
PCM
PCM
Not output
Dolby
Digital bit
stream
PCM
PCM
Not output
PCM
PCM
Not output
PCM
PCM
PCM
Not output
Output
CONTINUE