All reset mode – Kenwood TK-3501E User Manual
Page 28
Advertising
20
ALL RESET MODE
This function allows you to reset all frequencies, QT/DQT
settings, and the VOX Gain level to their original values.
To reset the transceiver:
1 With the transceiver power OFF, press and hold the PTT
switch and Side key while turning the transceiver power ON.
• Continue to hold the PTT switch and Side key until the LED
lights orange (approximately 2 seconds).
2 Release the PTT switch and Side key.
• A beep will sound and all channel frequencies and QT/DQT
settings, or the VOX Gain level return to their original values.
Note:
◆ The channel frequencies and QT/DQT settings cannot be reset
at the same time as the VOX Gain level.
Advertising