Texsport 01085 Hilo Hut II Shelter - Manual

INSTRUCTIONS
Item 01085
Hilo Hut II Privacy Shelter
Thank you for purchasing this Texsport shelter. Please read and understand each step of the set-up instructions. We encourage you to set-up this
shelter at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy
your new shelter and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A ......1 Shelter skin
B ......4 Sets of leg poles
C ......4 Sets of base poles
D ......Stakes, clews and
guy ropes
NOTE:
Prepare your camp site by removing all
sharp stones, twigs, etc. The site should
be flat and have no depressions that
could collect rain water.
A
B
C
D
STEP 4 - This is what your shelter
should look like at this point. STEP 5 - Assemble the 4 sets of
base poles and insert into the web
pockets at the bottom of the
shelter skin STEP 6 - Secure poles and skin
with the attached velcro.
STEP 1 - Spread out shelter skin. STEP 2 - Assemble the 4 sets of leg
poles and push through the sleeve. STEP 3 - Insert the pre-assembled
roof poles into the leg poles.
STEP 7 - Stake down all 4 corners
of the shelter at the web loops. STEP 7 - This is what the bottom of
the shelter should look like. STEP 8 - To attached the fly, drap
over shelter and secure with hooks
on all four sides.
01085 Instructions 12-10_Layout 1 12/26/10 6:02 PM Page 1