Texsport 01101 Hayden Square Dome Tent - Manual

Thank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent
at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new
tent and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A - Tent Skin
B - 1 Fiberglass Fly Pole
C - 2 Fiberglass Tent Poles
E - Tent Stakes, Ropes
and Clews
NOTE:
Prepare your camp site by removing all
sharp stones, twigs, etc. The site should
be flat and have no depressions that
could collect rain water.
A
B
C
D
STEP 1 - Spread the tent floor on the
ground and assemble tent poles. Lay
poles in an X formation on the tent
skin. STEP 2 - Insert the tent pole into a
web pocket and do the same for the
opposite end of the tent pole. STEP 3 - Attach the speed clips to
secure tent poles.
STEP 4 - This is how your tent should
look like at this point. STEP 5 - Secure the tent poles together
with the ties provided in the center. STEP 6 - Stake down the tent once you
are sure you have it in the right place.
STEP 7 - Spread fly out on the ground. STEP 8 - Assemble fly pole and insert
into the web pockt on the fly. STEP 9 - Tie fly pole to secure with
ties.
INSTRUCTIONS
Item 01101
Hayden Square Dome Tent
01101 Instructions 12-10_Layout 1 12/27/10 1:32 PM Page 1