AMICA 1143.4TsYDX EN - Manual (Page 10)

10
2
1
230V 1N~
INSTALLATION
Electrical connection
Warning: This appliance must be earthed.
The appliance must be installed by a com-
petent electrician using a double pole control
unit of 16 ampere minimum capacity with
3mm minimum contact separation at all
poles.
We recommend that the appliance is con-
nected by a qualified electrician who is mem-
ber of the N.C.E.I.C. and who will comply with
the I.E.E. and local regulation.
 Access to the main terminal is gained by
opening the terminal block cover at the
rear of the appliance (use a small flat-
bladed screwdriver).
 Connection shuld be made with 1,5mm 2
twin and earth cable.
 First strip the wires, then push the cab-
lethrough the cable clamp in the terminal
block cover.
 Connect the cable to the terminal block
and tighten the cable clamp screw (see
diagram).
 Close the terminal box, ensuring that the
cover is engaged on the locking tabs.
Live
(Red or Brown)
Neutral
(Black or Blue)
Earth
(Green/Yellow
or sleeving)
Cable clamp