AMICA 1143.4TsYDX EN - Manual (Page 14)

14
OPERATION
The function AUTO is now on; the oven will
start operating from the point when the differ-
ence between the set operation end time and
the operation duration time occurs (e.g. the
operation time is set to 1 hour, the operation
end time is set to 14.00, so the oven will start
working automatically at 13.00).
When the oven reaches the operation end
time it will switch off automatically, the alarm
will be activated and the function AUTO will
start flashing again.
 Set the oven function knob and the tem-
perature regulator knob to the switched–off
position.

Press sensor 1, 2 or 3 in order to switch off
the alarm; the function AUTO will go out and
the display will show the current time.
Cancel settings
Timer and automatic function settings may
be cancelled at any time.
Cancel automatic function settings:
 press sensors 2 and 3 simultaneously,
Cancel timer settings:
 press sensor 1 to select timer settings,
 press sensors 2 and 3 again,
Change the timer beeps
The tone of the timer beeps may be
changed as follows:
 press sensors 2 and 3 simultaneously,
 select “tone” function with the 1 sensor,
the display panel will start to blink:
● with the 2 sensor press the appropriate
sensors from 1 to 3 to select the option you
wish.
1 3 2
1 3 2