ARRI ARRIFLEX 435 - Manual (Page 20)

2 0
WRS System Guide 08/2004
W R S C O M P O N E N T S
Universal Radio Module 1 (URM-1)
The Universal Radio Module 1 mounts on the UMC-1 or 435 Xtreme to allow the
camera to communicate with the WMU-1.
Compatibility: Can be used with Wireless Main Unit 1 (WMU-1) only.
K2.52048.0 Universal Radio Module 1
Universal Radio Module 2 (URM-2)
The Universal Radio Module 2 mounts on the UMC-1 or 435 Xtreme to allow the
camera to communicate with the WMU-2 or WMU-3. The URM-2 is similar to the
URM-1, except that it has the new radio modem installed.
Compatibility: Can be used with Wireless Main Unit 2 or 3 (WMU-2, WMU-3).
Does not work with WMU-1.
K2.52237.0 Universal Radio Module 2
Studio Lens Data Box 2 (Studio LDB-2)
The Studio Lens Data Box 2 (Studio LDB-2) is the central processing point for the sig-
nals from the Lens Control System (LCS) and from the Lens Data System (LDS). It
controls lens motors, supplies the Lens Data Displays and IVS with information and
manages the connection to the LCS hand units for focus, zoom, iris and to the WRC -1
for camera control, either hardwired through WHA-2 or WHA-3 or wirelessly.
Compatibility: The Studio Lens Data Box 2 can be mounted to the ARRICAM Studio
or to the Studio LDB Adapter. It can be attached without the use of tools. With the
exception of the WMU-1 it is compatible to all hand units and the Controlled Lens
Motors CLM-1 and CLM-2.
K2.54194.0 Studio Lens Data Box 2
Studio Lens Data Box (Studio LDB)
The Studio Lens Data Box (Studio LDB) is the central processing point for the signals
from the Lens Control System (LCS) and from the Lens Data System (LDS). It con-
trols lens motors, supplies the Lens Data Displays and IVS with information and mana-
ges the connection to the LCS hand units for focus, zoom, iris and to the WRC-1 for
camera control, either hardwired through WHA-2 or WHA-3 or wirelessly.
Compatibility: The Studio LDB can be operated with the Wireless Main Unit 1
(WMU-1) only. It does not work with WMU-2 and WMU-3. The Studio LDB can be
attached to the ARRICAM Studio or to the Studio LDB Adapter without the use of
tools. Controlled Lens Motors CLM-1 and CLM-2 can be used.
K2.54014.0 Studio Lens Data Box 1
Universal Radio Module 1 (URM-1)
Universal Radio Module 2 (URM-2)
Studio Lens Data Box 2 (Studio LDB-2)
Studio Lens Data Box (Studio LDB)