ARRI ARRIFLEX 435 - Manual (Page 21)

08/2004 WRS System Guide
2 1
W R S C O M P O N E N T S
Studio LDB Adapter
The Studio LDB Adapter allows the mounting of the Studio Lens Data Box 1m/3ft
away from the camera body. This is preferable under some circumstances, most notably
when using the ARRICAM Studio on a Steadicam.
Compatibility: The Studio LDB Adapter works only on the ARRICAM Studio with
Studio Lens Data Box or Studio Lens Data Box 2.
K2.54144.0 Studio LDB Adapter
Lite Lens Data Box 2 (Lite LDB-2)
The Lite Lens Data Box 2 (Lite LDB-2) is the central processing point for the signals
from the Lens Control System (LCS) and from the Lens Data System (LDS). It con-
trols lens motors, supplies the Lens Data Displays and IVS with information and mana-
ges the connection to the LCS hand units for focus, zoom, iris and to the WRC-1 for
camera control, either hardwired through WHA-2 or WHA-3 or wirelessly.
Compatibility: The Lite Lens Data Box 2 can only be mounted on the ARRICAM
Lite. It can be attached with a 3 mm hex key. With the exception of the WMU-1 it is
compatible to all hand units and the Controlled Lens Motors CLM-1 and CLM-2.
K2.54195.0 Lite Lens Data Box 2
Lite Lens Data Box (Lite LDB)
The Lite Lens Data Box (Lite LDB) is the central processing point for the signals from
the Lens Control System (LCS) and from the Lens Data System (LDS). It controls lens
motors, supplies the Lens Data Displays and IVS with information and manages the
connection to the LCS hand units for focus, zoom, iris and to the WRC-1 for camera
control, either hardwired through WHA-2 or WHA-3 or wirelessly.
Compatibility: The Lite LDB can be operated with the Wireless Main Unit 1 (WMU-1)
only. It does not work with WMU-2 and WMU-3. The Lite LDB can be attached with
a 3mm hex key. Controlled Lens Motors CLM-1 and CLM-2 can be used.
K2.54025.0 Lite Lens Data Box 1
Controlled Lens Motor 1 (CLM-1)
Due to its high torque this lens motor is particularly suited for operation with stiff len-
ses or in cold weather.
Compatibility: To operate the CLM-1 motor, the Universal Motor Controller, a Lens
Data Box or Functional Expansion Module (FEM-2) is necessary. The CML-1 can be
mounted to 19mm support systems. A bracket for 15mm support rods and an offset
bracket for 19mm and 15mm are available.
K2.41378.0 Controlled Lens Motor 1
Studio LDB Adapter
Lite Lens Data Box 2 (Lite LDB-2)
Lite Lens Data Box (Lite LDB)
Controlled Lens Motor 1 (CLM-1)