ARRI ARRIFLEX 435 - Manual (Page 24)

2 4
WRS System Guide 08/2004
WFU-1
URM-1
FEM-2
WFU-3
WZU-1
WZU-3
WRC-1
WMU-1
and/or
or
or
or
URM-1
UMC-1 LDB
435 Advanced,
435 Xtreme
ARRICAM
16SR3, 235, 435
435ES, 435 Advanced,
535A, 535B
C O M P A T I B I L I T Y O V E R V I E W
WMU-1 (old radio modem)
• Neither WZU-1 nor WZU-3 should be attached between the Wireless Remote
Controller (WRC-1) and the Wireless Main Unit.
• When the 435, 435ES or 435 Advanced is used with the UMC-1, wireless lens con-
trol and camera RUN is possible. To use features like wireless fps and shutter
changes or ramps, the camera needs a FEM-1.
• A UMC-1 is not needed on a 435 Xtreme, since UMC functions are integrated into
the FEM-2 of the 435 Xtreme. The FEM-2 provides LDS functions, speed/iris and
shutter/iris ramps plus improved ramping features. A UMC-1 is also not needed
on the ARRICAM system, since UMC functions are integrated into the Lens Data
Boxes.
• The zoom knob on the WZU-1 is in a better position for use on the WMU-1 than
the WZU-3 zoom knob.