AMICA PGCZ6411W EN - Manual (Page 18)

18
OPERATION
Using cooktops with control knob ignition (Zp)
• Press the selected control knob and turn anti-clockwise into Burner ON large flame
position.
• Hold depressed until gas is on fire
• Release the knob and set the required flame size.
Using cooktops with leak protection (Zt)
spark igniter
protection
Hold the burner’s control knob depressed for approx. 10 seconds in Burner ON large
flame position. This way, you activate the protection device.
Repeat the attempt if the protection has not activated for the first time.
Leak protection will cut off the gas supply if there is no flame for approx. 60
seconds.
At the Zt cooktops, the gas supply to the burners is adjusted with the knobs
equipped with the leak prtection.