AMICA PGCZ6411W EN - Manual (Page 22)

22
TROUbLESHOOTING
In each case, proceed as follows:
• Turn the burners off
• Disconnect power supply
• Report for repair
• The user can fix some minor malfunctions himself, according to the guidance given in the
tables below. Please check the information below before contacting the service depart-
ment.
PRObLEM CAUSE REMEDIES
1.The appliance does not
work
- power cut - check the home power fuse,
replace if needed
2.Burner will not ignite - flame slots contaminated - close the gas cut off valve,
close burner control knobs,
ventilate the kitchen, take
the burner out of the cooktop,
blow and clean the flame
slots
3.Igniter does not work - power cut - check the home power fuse,
replace if needed
- gas supply break - open gas cut off valve
- contaminated (caked) igni-
ter
- clean the igniter
- control knob released too
soon
- hold the control knob de-
pressed until the flame goes
on and persists
4.Burner extinguishes - control knob released too
soon
- hold the control knob de-
pressed until the flame goes
on and persists
5. crack in the ceramic
plate
Danger! Immediately disconnect the ceramic plate
from the mains (fuse) and call the nearest customer
Service centre.
6. If the fault still remains Disconnect the ceramic plate from the mains (fuse)
and call the nearest customer Service centre.
Important!
You are the person responsible for proper condition and
operation of the appliance in your household. If you call the
Service for a fault which resulted from improper operation,
you will be charged with the costs of the visit even during the
period of warranty. We shall not be held liable for damages
caused by a failure to observe this Manual.