Clary SP Series-Model PD - Manual (Page 39)

T H E C O N T I N U O U S P O W E R C O M P A N Y
39
4.10.3 TOGGLE RELAY ON/OFF
This menu allows you to manually control the Relays. Once at this screen, press the ENTER/SHOW
TIME button. To scroll thru the eight relays, press the SELECT/MENU MODE button.
When the Relay’s Manual mode is off, the current state of each relay can only be read but may not be
changed. To manually change the state of a relay, Manual mode must be first activated.
Note: Once Manual mode is active, the relay rules which normally control the relays will be ignored
(until Manual mode is again deactivated or power is cycled).
To toggle Manual mode ON/OFF, go to this screen to set the state of the relays to manual mode. Once
at this screen, press the arrow buttons to change the state from ON/OFF. After selected, press the
ENTER/SHOW TIME button. Press the SELECT/MENU MODE button to scroll thru the eight relays.
Once at the desired relay screen, press the arrow buttons to select ON/OFF for that relay. Press the
ENTER/SHOWTIME button to select. Relay will now change states.
TOGGLE RELAY ON/OFF
STATE of MANUAL MODE
Current state = OFF
STATE of RELAY #1
Current state = OFF