Aalborg Totalizer - Manual (Page 16)

13
APPENDIX 4
NOTE: Follow Return Procedures in Section a.3.
WARRANTY
Aalborg
7 Mass Flow Systems are warranted against parts and
workmanship for a period of one year from the date of purchase.
Calibrations are warranted for up to six months after date of pur-
chase, provided calibration seals have not been tampered with. It is
assumed that equipment selected by the customer is constructed of
materials compatible with gases used. Proper selection is the
responsibility of the customer. It is understood that gases under pres-
sure present inherent hazards to the user and to equipment, and it is
deemed the responsibility of the customer that only operators with
basic knowledge of the equipment and its limitations are permitted to
control and operate the equipment covered by this warranty. Anything
to the contrary will automatically void the liability of Aalborg
7 and the
provisions of this warranty. Defective products will be repaired or
replaced solely at the discretion of Aalborg
7 at no charge.
Shipping charges are borne by the customer.
This warranty is void if the equipment is damaged by accident or mis-
use, or has been repaired or modified by anyone other than Aalborg
7
or factory authorized service facility. This warranty defines the obli-
gation of Aalborg
7 and no other warranties expressed or implied are
recognized.