Aalborg Totalizer User Manual
Page 6
3
(d)
SPECIFICATIONS
d.1
General Attributes
INPUT ANALOG RANGE:
5 to 10 VDC or 0 to 5 VDC jumper selectable.
POWER SUPPLY REQUIREMENTS:
12Vdc, 100mV Pk-Pk, less than 0.5 watts.
(OPTIONAL, require only for TOT-05).
POWER CONSUMPTION:
10 mA at 12 VDC, less than 0.125 watts.
ACCURACY:
±0.5% of full scale.
TEMPERATURE STABILITY:
±200 ppm/
F
C in the range of 5
F
C to 50
F
C.
DISPLAY:
7 digit, 8-mm figure height.
READING BACKUP:
20 years lithium battery, no external power required.
RESET:
Front panel push button momentary tact switch
(works only when Totalizer is connected to the power).
ALTITUDE:
Up to 10,000 feet.
CONNECTION METHOD:
Telephone modular plug.
d.2 CE Compliance
Any model Totalizer bearing a CE marking on it, is in compliance with
the below stated test standards currently accepted.
EMC Compliance with 89/336/EEC as amended;
Emission Standard: EN 55011:1991, Group 1, Class B
Immunity Standard: EN 55082-1:1992
Environmental (per IEC 664): Installation Level II; Pollution Degree II