Aalborg Vortex - Manual (Page 61)

56
Events List
0-CPU Temp. High
Events List
0-CPU Temp. High
The shown above Event List selections can be scrolled with the Up and Dn but-
tons. By pressing ENT or Esc buttons user may exit from scrolling mode.
c) Alarm Events Register Mask
With this menu selection user may individually mask (disable) any Alarm Event.
A typical display with Alarm Events Register Mask selection is shown below.
In the example shown above, event 2 with LCD bit code 1 (Vortex Frequency
above High Frequency Cut Off) is masked with asterisk. In order to change event
mask settings user should press Ent button. The flashing cursor will appear on the
left of the LCD screen (on the 0 event position). Use Dn [Cursor] button to move
to desired event code. Use Up button to change mask status (asterisk represent
masked event). Use Ent button to accept and save new mask settings in flow
meter’s non volatile memory.